Compactors,Cardboard,Recycling Equipment,Industrial,Waste,Balers,Online Phone: (847) 382-0766
Fax: (847) 382-8913
check box Testimonials... click here
check box Multi-bin baler output samples. click here
 
Downstroke Baler

Cardboard Baler / Drum Crusher
NEW AND IMPROVED!!
DP Series
DP-36
Baler Specifications

Downstroke Balers

The same great "NEW and IMPROVED" baler features are available on the DP-18, DP-24, & DP-30 products.

They are designed so that the press plate and cylinder can be easily lowered and the side mounted power unit easily removed for shipping (it is "bolted on" ). In addition, they can be easily moved into stockrooms, through hallways / doorways, and into elevators where other suitable waste and recycling equipment may be too large to access those areas. Getting the equipment in position where you can "Compact at the Source" is a labor and cost saving benefit.

*** We have also added the option to use a custom-made dereeler for wire bale ties or coiled polyester banding as shown on this picture to all of the DP and VB Series Downstroke Balers.

Downstroke Balers - Compactor
  Downstroke Balers - Compactor  
Downstroke Balers - Compactor
This is the new drawing for the DP-18, DP-24, DP-30, & DP-36 with the power unit mounted on the side. The Baler, with the hydraulic cylinder and press plate lowered for shipping, will now go thru a standard doorway.

Note: Shipping Height dimension "D". If necessary and/or requested.

New design for installation in stock rooms and areas with limited ceiling height and access clearance. Unit is easily reassembled when in place.


GENERAL EQUIPMENT SPECIFICATIONS for DP-36
Dimensions Depth  35" Width 62" Height 107"  (top of cylinder)
Compaction force (normal) 39,200lbs
Compaction force (max) 47,124lbs
Ram face dimension 36"W x 24"D
Ram face pressure (normal) 45 psi
Ram face pressure (max) 55 psi
Cycle time 40 sec
Unit weight 1575 lbs
Baler meets or exceeds ANSI Z245.5 safety standards.
Baler uses readily available, nationally and internationally distributed components.
Baler is assembled from at least 95% American made components.


BALE SPECIFICATIONS for DP-36
Bale size 24"D x 20"H x 36"W
Bale weights 250 to 350 lbs - OCC
250 lbs - P.E.T
255 lbs - HDPE
245 lbs - ALUMINUM
270 lbs - PAPER


HYDRAULIC SYSTEM SPECIFICATION for DP-36
Motor            (hp)
                      (rpm)
                      (voltage)
5
1750
208/230/480 VAC 60Hz Three phase (220 volt single phase is optional)
Pump            (type) Rotary vane positive displacement
System pressure (normal)
                                 (max)
2000 psi
2400 psi
System design pressure 2500 psi
Cylinder        (bore)
                      (stroke)
                      (rod)
5"
34"
3"

         The system is completely self contained within the baler. The power unit has the following features: 20 micron filtering system, soft shift
    directional valve, and oil heater port.


PAINT SPECIFICATIONS for DP-36
Primer Rust inhibiting bottom coat, 2 mil thickness
Paint Industrial enamel, high solids, 4 mil thickness

For further compactor, baler, and drum crusher information, please call or fax us at the numbers below.
FREE Quotes! Click here